How to Mop a Floor

The one method that remains ever effective for cleaning floors is the traditional damp mopping. It can clean all types of flooring including vinyl sheet flooring, ceramic, vinyl tile and porcelain tile. Though sweeping and Swiffer-type pads too can clean dust or light sand, only a thorough wet mopping can truly rid a floor of all its dirt.

Notwithstanding, it is not all floors that like water. For example, floors like laminate, bamboo, and Cork may get damaged when water is used on them. As much as a properly sealed laminate flooring can still tolerate damp wipes every once in a while, heavy mopping can ruin it.

That being said, mopping can prove quite effective for floors that can tolerate water. This article will show you how to mop your floors effectively.

How Often Should You Clean a Floor?

So, you might be wondering about how often you need to clean your floor. Well, it depends. Floors in high-traffic areas like bathrooms, dining areas, kitchens, and hallways ought to be mopped at least once a week. Don’t forget that vacuuming and sweeping are also essential to the overall cleanliness of your floors.

If you have a wooden floor, you need to be more cautious when mopping. You may use a vacuum cleaner suitable for hardwood floor as well as area rugs (if you have though). Check out this guide on Cleanthefloor for better understanding multi-floor vacuum cleaners.

Thus, as you mop, ensure that you finish things up by vacuuming or sweeping. When you notice that your floor needs a thorough cleaning, pick up your mop, and clean the floor right away.

 What Supplies Do You Need?

  1. A vacuum cleaner, broom and dustpan
  2. A Sponge
  3. A Household cleaner (not necessary)
  4. A Mop
  5. Two Mop buckets
  6. Detergent for mopping
  7. Paper towels or rags

How to Clean your Floor

It’s easy to think that mopping is no big deal after all people do it all the time. However, people often neglect some essential aspects of the exercise like using a second mopping bucket to rinse. Most people use the same bucket of wash water to clean as well, and this is not supposed to be so. It is more effective to use two buckets. One should contain soapy water and the other clean water for rinsing. The following are other steps you have to take to mop up your floor effectively.

Choose a Mop and Buckets

Your floor type will determine the kind of mop you choose. A classic string mop will be more effective for a floor that has a lot of texture. A strip mop too will do. Smooth floors, on the other hand, are compatible with Sponge mops. If you’re using a strip or string mop, a bucket with built-in wringers will do. For Sponge mops, a bucket that has a handle should be used.

Choose a Detergent

The detergent for cleaning that you choose is also quite important. No one wants to use their entire day cleaning only to end up with a stained floor. Choose your detergent wisely.

vacuum before mopSweep or Vacuum First

One way to make your mopping more useful is to either sweep or vacuum before mopping. It prevents your floor from becoming muddy or annoyingly sticky while you’re moping. Besides, there’s the possibility that there are already some sticky spots on your floor, and vacuuming first will help you tackle them before mopping. A sponge and soapy water will help here.

Fill the Buckets

Each of the two buckets should be filled with hot water. Hot water cleans dirt quicker than cold or warm water does. After filling the buckets, add your detergent. Make sure you don’t add too much detergent because too much soap will not make your work more comfortable in any way. Instead, it will make it even harder to rinse the floor.

Dip and Wring the Mop

Using your hands or a wringer, dip your mop into the soapy water and wring it out. The idea is to make the mop damp enough to attract dirt. This does not mean that the mop should be dripping wet. Too much water can ruin the floor or prevent it from drying up quickly.

Begin To Mop

Mop the floor by gently working your way from one side to the other. Make sure to not step on the spots where you’ve already moped. If what you’re using is a sponge mop, mop in a straight line. If it’s a rag mop, mopping in figure-8 motions will do the trick

Stop for Stubborn Spots

There’s the possibility that you encounter some stubborn spots. Do not just skip them. It would be best if you spent extra time on them. Make sure to rub and scrub the spot in a back and forth motion. Don’t forget to apply enough pressure to move the grime. Also, corners and edges are often hard to reach and may require you to squat or bend to scrub the floor well. A sponge or paper towel is usually useful here.

Rinse the Mop

After you’ve successfully scrubbed part of the floor, the next thing would be to rinse the soapiness off your mop in the second bucket. You might want to dunk the mop up and down a couple of times to get a good portion of the dirt on it out. Wring it out to drain the dirty water.

Continue Mopping

Proceed to mop the floor. You’ll have to do a repeat of the mopping and rinsing process. Do this until you’ve covered the whole floor. Pay attention to how the wash water and the rinse water change colours as you mop. Make sure to empty and refill the buckets once the water begins to turn dingy or grey. There’s no point cleaning if you’re doing it with dirty water.

Do a Final Rinse

If you have carried out all the outlined steps above successfully, it is at this point that you do a final rinse. Though your floor should be pretty clean by now, the final rinse is to make sure that there’s no residue of soap or dirt on the flooring. Just go over the entire floor one last time. No matter how tired you already are, you’ll be glad you did this.

Let the Floor Dry

While your floor dry, rinse your mop and buckets thoroughly. Also, allow them to dry as well. Make sure they are scorched before storing them anywhere. As for your floor, avoid walking on it until it is dry.


There you have it—your step by step guide to mopping. Don’t let all the procedures scare you; the exercise is not that overwhelming. Just make sure to set out a day to do this chore. Move all the furniture away, so they don’t obstruct you while you more. Finally, keep kids away while you do this, we don’t want anyone slipping and losing a tooth, do we? All in all, you’ll be proud of yourself after the day’s work.

Dream About Biggest California King Bed

Do you know what’s more amazing than a big king-sized bed? A bigger bed like the California king bed. California king beds are more fascinating and more magnificent than the king-sized beds.

They are long with 4 inches which makes them the longest bed. With the California king bed, you get a length of 84 inches and a wideness of 72 inches, how amazing is that? This spectacular mattress is highly favored and cherished among skilled athletes, basketball players and also celebrities.

It could be recalled that in 2011, the super talented diva, Rihanna recorded a hit song about being 10,000 miles apart away from her California king on a California king bed. However, this is not absolutely true because the California king mattresses possess a wideness of 72 inches, which allows you to stretch and roll over in bed.

You can reach out for your partner in bed to snuggle since the California king mattress is 4 inches thinner than a standard king mattress (which is often referred to as an Eastern king bed). Notwithstanding, let’s not spoil the vibes of the ‘California king’ song.

consider before purchasing a California king bed

For tall folks who also have a big bedroom space to fill, a best king size mattress under $1000 is a perfect choice. It is instead fascinating to know that the history of the California mattress can be traced to the state itself, but how did the bed evolve?

One of such stories about the California mattress suggests that the bed was born out of the request of celebrities from the silver screen in the 1920s and 1930s when they ask for a better space to lay on with their silky gorgeous attires while reading the scripts and also sipping martinis being served by their assistants.

Another story traces the California king bed’s origin to the unethical practice of the 1960s when a furniture company in Los Angeles dance to the tune of celebrities and made bigger beds upon request.  These celebrities were after purchasing a big bed to be able to brag about possessing the most significant kind of bed that was ever on sale. However, this “who has the biggest bed’ competition among celebrities in the 1960s led to the introduction of big sized beds to the general market.

Also, another incredible tale about the California king bed talks a man from Concord, Calif who was called David Bergeson. It’s reported that this man had unusually long legs that didn’t fit into a regular king bed and he also had unusual arms that didn’t make it easy for him to be able to reach and snuggle his wife in bed. Due to this reason that he asked a furniture maker to make a bed that will give both his body and marriage support.

However, one may choose to believe any of these narratives, but what is certain is that the California king bed has always possessed an appealing image. This bed is often mentioned in romantic novels and thus has made it more desirable. Before buying this large royal bed, below are a few things to take note of:

6 things to consider before purchasing a California king bed

  • Ensure it can get into the house: Buying a king size mattress that does not fit right into your space can be disappointing. Before purchasing the bed, take accurate measurements of your doors and stairway, this way you know if the bed could be easily brought into the room.
  • Consider your space: Although a California king bed carries all the goodness in design, think about your area before buying one. The bed needs a sitting space of about 2 feet of your space on all sides so that you can walk around and change sheets easily. A California king bed is perfect for more extended rooms.
  • Prepare to make a split decision: If you’re newly purchased then get king size mattress in a box, you should be prepared to buy a box spring which possesses two parts and is easy to manipulate.
  • Shop for sheets before purchasing: Your former linen and sheets may not fit the California king beds but there are unique stores you can get it from, so go sheets hunting.
  • The right headboard is necessary: It is not new that the California king bed is spacious, so you need to get a headboard that fits it. If the headboard is small, chances are that the bed may not be sleek and beautiful, rather a get big and pretty headboard.
  • Appreciate the value of size: You should know that a bigger bed means a big price tag. California king-sized beds are not the type of bed that you just put into your guest room unless you have one already. Plan a budget that’s got the sheets, duvets, blankets, and pillows included when planning on buying the California king bed.

Steps To Build A Table Saw Sled

Woodworking is almost impossible without making use of a table saw sled. Every woodworker has to make use of a table saw sled in the course of woodworking or furniture making.

As a tool, it is best to make perfect square crosscuts. Asides from that, you can also use it to make 45-degree miter cuts. The importance of a table saw sled cannot be overemphasized and as such, it is essential you know how to build one.

In this article, we shall be running through the steps needed to be followed to build a table saw sled successfully. You only have to get the necessary materials, follow the steps carefully, adhere to the safety instructions and then you are good to go.

Materials Needed To Build a Table Saw Sled

The correct materials will help you build a table saw sled faster. A number of the necessary materials needed include:

  • A 3/4″ plywood
  • Particleboard or MDF as an alternative.
  • A glue

Build A Table Saw Sled

Steps to Build a Table Saw Sled

  1. You Start By Cutting The Pieces

Once all the materials needed have been gathered and carefully marked, you can go on to begin cutting the pieces. If you are working on a crosscut sled, then you can make use of nine-ply birch or flat plywood as the case may be. At this stage, you also have to make sure that the fence of the sled squares well with the blade.

Here, you will begin cutting the plywood into pieces for the stiffener, the blade cover and the fence and trim them carefully to fit.

As you do this, gradually clamp mating faces and hold together making use of the glue. Make this look very smooth and keep layers intact while doing so. When you are done doing this, you can now go on to make use of your table saw to cut the pieces into smaller sizes of about 1/4″ each.

  1. You Then Begin to AssembleYou Start By Cutting The Pieces

After you must have cut the plywood into pieces and clamped them together, you cut the hardwood into strips and make them into runners.

Go on to make the 1 x 4 hardwood into small pieces of about 1/6″ each and connect them to the sled base making use of a glue. You will need to wait for it to dry before you go on assemble the parts. Scrap off hardened glue and clean off any glue left in any of the parts.

Before you complete the assembling process, try sliding the sled in the slots to be sure it goes through. If it doesn’t, then you have to recheck the runners and make sure everything is right with them. When you notice darkened spots, sand them up and remove excess wood.

  1. Add The Stiffener and Square The Fence

Here, you will have to place the stiffener in the front boundary of the sled base, and you either glue it or screw it depending on what design you opt for.

Make sure the blade of the saw is set to 3/4″ and adjust carefully to allow the base into the blade of the saw. Once you have attained 3 inches from the back, you can stop cutting and start finishing.

With the stiffener attached, the back edge and the fence as to be aligned. To do this, you will have to square the fence and screw it carefully. Screw the lade cover as well and make sure it is positioned in place.

  1. Add The Stop Blocks and FinishStop Blocks and Finish

This is the final stage of the whole process, and it requires that you add stop blocks. These stop blocks are what help to shield the table saw sled from losing while being used.

To add stop blocks, add a piece of wood to the base of the sled while screwing it. Also, make sure the blade is half covered and protected by the fence.

Bottom Line

If you were able to follow through till the last stage, then you should have succeeded in a building a good table saw. If you missed it at any point, you don’t have to worry. Just re-visit the steps and follow them carefully. Hybrid table saws are getting more popular these days. Check this review on the best hybrid table saws and the benefits.